Contact
Phone: +86-315-8566505
Email：calor@euryusense.com
Whatsapp：+86 15102582032
Add：Lihaozi village, Qianying Town, Fengnan District, Tangshan City, Hebei province
Products
The working principle of thermocouples is based on the Seebeck effect. It is mainly used to measure the temperature of molten steel and high temperature molten metal. Temperature is the lifeline of steelmaking, if the temperature control is not good, not only can not make good steel but also a great waste of resources. Rapid temperature measurement thermocouples are used in large, medium and small steel mills, for the measurement of liquid steel temperature in front of the furnace, after the furnace and large, medium and small steel packages, with fast response and high measurement rate
The sampler is mainly used in the sampling of converter, ladle, continuous casting tundish and refining furnace. The samples of molten steel in ladle can be taken out in 3-5 seconds, and then sent to the laboratory to analyze various elements in molten steel by spectral analyzer. To further control the quality of steel.
The sampler is mainly used in the sampling of converter, ladle, continuous casting tundish and refining furnace. The samples of molten steel in ladle can be taken out in 3-5 seconds, and then sent to the laboratory to analyze various elements in molten steel by spectral analyzer. To further control the quality of steel.
The sampler is mainly used in the sampling of converter, ladle, continuous casting tundish and refining furnace. The samples of molten steel in ladle can be taken out in 3-5 seconds, and then sent to the laboratory to analyze various elements in molten steel by spectral analyzer. To further control the quality of steel.
The sampler is mainly used in the sampling of converter, ladle, continuous casting tundish and refining furnace. The samples of molten steel in ladle can be taken out in 3-5 seconds, and then sent to the laboratory to analyze various elements in molten steel by spectral analyzer. To further control the quality of steel.
The sampler is mainly used in the sampling of converter, ladle, continuous casting tundish and refining furnace. The samples of molten steel in ladle can be taken out in 3-5 seconds, and then sent to the laboratory to analyze various elements in molten steel by spectral analyzer. To further control the quality of steel.
First, the sampler can be divided into hot metal sampler, molten steel sampler, ultra-low carbon sampler, needle sampler, vacuum sampler and so on.
First, the sampler can be divided into hot metal sampler, molten steel sampler, ultra-low carbon sampler, needle sampler, vacuum sampler and so on.
Temperature sampling two-in-one sampler
First, the sampler can be divided into hot metal sampler, molten steel sampler, ultra-low carbon sampler, needle sampler, vacuum sampler and so on.
Model: 5M/12-4C 4.5M/12-4C
Length: 5 m 4.5 m
Compensation wire: S division, MICCE4.5 four core armouring compensation wire including aviation plug, CE connector.
Material: Carbon steel
Model: SCC ML-6P-M6P/F6P
Length: 850mm, 6-core compensation wire, both ends of the aviation plug, core 1, 2, 3, 5 material copper, core 4, 6 material copper nickel, diameter 6mm
Insulation between wires: >500MQ
Model: OY-FQ-JCJ-II
Material: carbon steel copper head
Dimensions: Length 310±2mm, outer diameter 23.8mm with 6-pin aviation plug
Insulation between wires >500MQ